advantage:
(1) It can be arranged in various parts of the boiler, and can blow dust on the heating surface of the furnace chamber, horizontal flue and tail shaft.
(2) It has more obvious effect on slagging, low ash melting point and sticky ash.
(3) The source of steam is relatively sufficient.
Disadvantages:
(1) Since steam soot blowing is based on jet soot blowing, the medium blowing area is limited;
(2) Because the steam sootblower is to spray the nozzle into the furnace for rotary sootblowing, the nozzle is withdrawn after the sootblowing, so there are many moving parts, which results in frequent operation of the sootblower and high failure rate. , Large amount of electrical maintenance and repair;
(3) Large loss of working medium and high operating cost;
(4) The soot blowing cycle is long, which makes the heated area ash too much, and even makes the ash accumulation sinter and harden, increasing the difficulty of soot blowing;
(5) If the pressure of steam soot blowing is too high or long-term use, it will accelerate the wear of the metal pipe wall, and the low pressure will affect the soot blowing effect;
(6) When the steam hydrophobic effect is poor, it will also cause thermal shock to the metal pipe wall of the heated surface, causing water hammer and corrosion of the soot blowing pipeline;
(7) The price is expensive;
(8) The use of steam soot blowers will increase the moisture content in the flue gas and increase the dew point temperature of the flue gas, thereby increasing the clogging and corrosion of the cold end of the economizer.
Zhejiang Lemond Power Equipment Co., Ltd
Addresss:NO.89 xueyuan road, jiangzao town, zhuji city, zhejiang China.
Postal Code:311800.
Tel: +86-575-87188938.
Mob: +86 18702132593
Fax:+86-575-87010778.
Email:info@zjlemond.com
