Long Retractable Soot Blower of Boiler

Long Retractable Soot Blower of Boiler

A long retractable soot blower is used to remove ash in the boiler superheater and reheater area(also used for economizer). During soot blowing, the soot blower lance tube and nozzle head rotate and extend into the boiler flue to blow the ash on the heating surface, the effective blowing radius is around 2 ~ 2.5m. A long retractable soot blower can be used in the flue gas temperature up to 1300℃. After finishing soot blowing, the sootblower lance tube will retract back from the boiler to avoid being broken by high-temperature flue gas.
During the operation of the boiler, soot and coking on the heating surface are the most common phenomena, so it’s very necessary to install a soot blower at the power plant. At present, steam soot blowers and sonic soot blowers are the two main types of soot blowers installed in the power station boiler, steam soot blower is the most widely used and the most effective one.
Share to
Send Inquiry
Chat Now
Description
Technical Parameters

Long Retractable Soot Blower Features


Soot blowing medium

Steam

Application field

Convection heating surface of boiler superheater, reheater, economizer

Valve material

Cr-Mo steel

Maximum gas temperature

500℃

Blowing time

45-745s

Blowing tube material

Cr-Mo steel or special steel suited for boiler working condition

Steam consumption

30-100kg/min

Travel distance

0.3-11m

Total weight

200-770kg

Blowing angle

0°-360°

Effective blowing radius

0.5-4.5m

Recommended blowing pressure

0.8-1.5Mpa

Total weight

200-1300kg


LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.

 

How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.

Long Retractable Soot Blower of BoilerLong Retractable Soot BlowerLong Retractable Soot Blower

Long Telescopic Soot Blower Workshop


Long Telescopic Soot Blower WorkshopLong Telescopic Soot Blower WorkshopLong Telescopic Soot Blower Workshop
Long Telescopic Soot Blower WorkshopLong Telescopic Soot Blower WorkshopLong Telescopic Soot Blower Workshop



Long Retractable Soot blower Application


During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.

Long Retractable Sootblower Applications


Long Telescopic Soot Blower Packaging


We generally use a framework and wooden case package, which are suitable for sea and land export transportation. For longer soot blowers(above 6 meters), we will use frame packaging and fix both sides with channel steel. For shorter soot blowers (less than 5 meters) and soot blower parts, we will use wooden cases for packaging. Each package will be covered with a rainproof cloth to prevent moisture. We usually use container and bulk cargo ships for transportation. If it is less than 12 meters, we will use the container for transportation. If it is more than 12 meters, we will put it on the deck of the ship. We have enough shipment experience for the transportation of super long products. Welcome to ask any soot blower queries, we are very glad to support you.

 


Long Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower PackagingLong Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower PackagingLong Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower Packaging
Long Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower PackagingLong Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower PackagingLong Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower Packaging
Long Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower PackagingLong Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower PackagingLong Retractable Soot Blower Features   Soot blowing medium  Steam  Application field  Convection heating surface of boiler superheater, reheater, economizer  Valve material  Cr-Mo steel  Maximum gas temperature  500℃  Blowing time  45-745s  Blowing tube material  Cr-Mo steel or special steel suited for boiler working condition  Steam consumption  30-100kg/min  Travel distance  0.3-11m  Total weight  200-770kg  Blowing angle  0°-360°  Effective blowing radius  0.5-4.5m  Recommended blowing pressure  0.8-1.5Mpa  Total weight  200-1300kg      LMD-PSSL Long retractable soot blower is commonly used in various power station boilers, industrial boilers, biomass boilers, waste heat recovery boilers, and refuse incineration boilers. Different environments have different design requirements for soot blowers, we will choose appropriate soot blower lance tube materials according to the flue gas temperature and corrosion conditions to meet the plant site requirements. Our commonly used lance tube materials are T91, 15CrMoG, and 310S, most of which are alloy steel and high temperature resistant stainless steel, the material is purchased from Baoshan iron&steel company, which is the biggest steel company in China.     How does the soot blower finish soot blowing? Soot blower connects the steam by mechanical or pneumatic open the poppet valve on the sootblower, when the steam enters into the feed tube, at the same time, sootblower lance tube is rotating and moving forward, the steam injected through the nozzle to finish the ash blowing. We will design soot blowers according to the drawings and parameter requirements provided by customers to achieve the best blowing effect. The travel of the LMD-PSSL soot blower is about 2~11 meters, which is designed differently according to different boilers.  Long Retractable Soot Blower of Boiler	Long Retractable Soot Blower	Long Retractable Soot Blower   Long Retractable Sootblower Applications During the whole operation of the boiler, the furnace, superheater, reheater, economizer, air preheater, and SCR catalyst all need to be installed with soot blowers. Our long retractable soot blower is used for the superheater area shown in the figure below. The temperature here is relatively high, so the long retractable soot blower will be selected. After the purging is completed, the soot blower barrel will be returned to the outside of the boiler.  Long Retractable Sootblower Applications  Long Telescopic Sootblower Packaging



FAQ


Q: Are you a manufacturer or trading company?

A: We are the manufacturer which has an export license.

 

Q: What is your priority compared with another enterprise?

A: We own all kinds of mechanical processing equipment, great technical power, and complete testing tools, moreover, we can provide competitive prices as we are the direct manufacturer.

 

Q: How long is your lead time?

A: For some parts, we only take 5-10 days, for the whole machine, it usually takes around 30 days in the normal case, if the order is very busy in the schedule, it will be longer.


Certificate


We have ISO9001, ISO14001, and ISO45001 certificates. And we have  EN10204/3.2 test certificate issued by SGS and Inspecco third party, this was required by a Turkey power plant when they purchased sootblower lance tube, feed tube, nozzle tube, rake tube, poppet valve from our company before. We could apply certificate according to customer’s requirements for different countries.


CertificateCertificateCertificate
CertificateCertificateCertificate
CertificateCertificateCertificate



Hot Tags: long retractable soot blower of boiler, China, manufacturers, suppliers, customized, wholesale, buy, low price, Incineration Powerplant Soot Blower, Long Retractable Steam Soot Blower, Short Retractable Sootblower, Soot Blower, Thermal Power Plant Soot Blower, Industrial Soot Blower

Send Inquiry
Send Inquiry